SPARC S7-2 Server

Processor

Number

One or two SPARC S7 8-Core, 4.27GHz processors, not expandable

CPUs

Up to 64 threads per processor (up to 8 threads per core)
Four data analytics accelerators per processor, each supporting four concurrent in-memory query operations with decompression
Eight on-chip encrytion instruction accelerators with direct nonpriviledged support for 15 industry-standard cryptographic algorithms: AES, Camellia, CRC32c, DES, 3DES, DH, DSA, ECC, MD5, RSA, SHA-1, SHA-224, SHA-256, SHA-384, SHA-512 (one per core)
Eight floating-point units per processor (one per core)
One random number generator (one per processor)

Cache memory

Level 1: 16KB instruction and 16 KB data per core
Level 2: 256 KB L2 I$ per four cores, 256 KB L2 D$ per core pair
Level 3: 16 MB L3$ on chip

Main Memory

Capacities

DIMM slots: 8 slots per processor, supporting half or fully populated configurations
DIMM type: DDR4-2400
DIMM size: 16GB, 32GB or 64GB
Maximum capacity: 1024GB max configuration with 64GB DIMMs and two processors

Standard Integrated Interfaces

Network

4 × 10 GbE Ethernet ports (100 Mbps/1 Gbps/10 Gbps), full duplex only, auto-negotiating

Network Management

One dedicated 10Mbps/100Mbps/1Gbps RJ-45 port Ethernet port

Serial Management

One dedicated RJ-45 port

Remote Management

Integrated Lights Out Manager (ILOM)

USB

Two USB 2.0 ports (front)

PCI Expansion Slots

3 low-profile PCI-Express 3.0 x8 slots.

Slot #	Physical	Electrical
1	x16	x8
2	x16	x8
3	x8	x8

Internal Mass Storage

Disks

1x optional 12Gbps SAS-3 controller
Eight 2.5-inch SAS-3 disk drive slots (4 support NVMe)
600GB or 1.2TB 2.5-inch SAS-3 disk drives
400GB 2.5-inch SAS-3 solid state drives
800GB 2.5-inch SAS-3 solid state drives
1.6TB or 3.2TB or 6.4TB NVMe solid state drives
SAS-3 / NVMe mixing is supported.

Power Supplies

2 × 800 or 1200 Watt, hot-swappable, N+1 redundant power supply units (PSU)

Environment

Input Voltage

100 to 120 VAC at 800W, 50/60Hz
200 to 240 VAC at 1200W, 50-60Hz

Input Current

4.1/8.6 A @ 100/200 VAC (max)

Input Power

851/819 W @ 100/200 VAC (max)

Maximum Heat Dissipation

2904 BTU/hr, 3064 KJ/hr

Power Consumption

Online power calculator

Temperature

Operating: 5° C to 35° C (41° F to 95° F) ; decrease in maximum temperature: above 900 M (2952 ft) 1° C/300 m (1.8°/984 ft)
Nonoperating: -40° C to 65° C (-40° F to 149° F)

Humidity

Operating: 10% to 90% relative humidity noncondensing, 27° C (81° F) maximum dew point
Nonoperating: 93% relative humidity noncondensing, 38° C (100° F) maximum wet bulb

Altitude

Operating: 0m to 3,000m (0 ft. to 9,840 ft), except in China markets where regulations may limit installations to a maximum altitude of 2000 m
Nonoperating: 0m to 12,000m ( 0 ft. to 39,370 ft.)

Acoustic Noise - Sound Power Level LwAD

60% Fan Speed: 7.7 B (1 B = 10 dB)
100% Fan Speed: 8.6 B (1 B = 10 dB)

Acoustic Noise - Sound Pressure LpAM

60% Fan Speed: 62 dBA (avg of four bystander positions)
100% Fan Speed: 72 dBA (avg of four bystander positions)

Regulations
Meets or exceeds the following requirements:

Safety

UL/CSA 60950-1, EN 60950-1, IEC 60950-1 CB Scheme with all country differences

EMI/EMC

FCC 47 CFR 15, ICES-003, EN 55022, EN61000-3-2, EN61000-3-3

Immunity

EN 55024

Certifications

North American Safety (NRTL), European Union (EU), International CB Scheme, BIS (India), BSMI (Taiwan), RCM (Australia), CCC (PRC), MSIP (Korea), VCCI (Japan), VNTA (Vietnam), Morocco, Republic of Srpska.

European Union Directives

Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU, Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, and WEEE Directive 2012/19/EU

Dimensions and Weight

Height

43 mm (1.7 in.), 1U

Width

437 mm (17.2 in.)

Depth

737 mm (29 in.)

Weight

18 kg (40 lbs) max, without rackmount kit

Clearance and Service Access

Front

1232 mm (48.5 in.)

Rear

914.4 mm (36 in.)